Course Code

3712
 

     Duration

35 Hours
 
 

     Requirements

There are no pre-requisites for the course, although it would be beneficial if the delegates have some familiarity with networking technologies.

 

     Overview

A 5 day practical networking course designed to familiarise students with Cisco IOS (version 12). The course details the key commands used to configure and secure Cisco routers and switches, and covers the CCNA syllabus - including wired and wireless LAN access.

Students will inter-connect networks by implementing static routes, distance-vector and link-state based dynamic routing protocols.

The devices will be configured to route traffic across LAN/VLAN//WAN boundaries, by encapsulating datagrams across serial data links using various WAN protocols, such as HDLC, Frame Relay, ISDN and PPP (with CHAP authentication). VLAN encapsulation/tagging will be via IEEE802.1Q/P.

Standard and Extended Access Control Lists will be configured and applied to router interfaces to filter traffic based on IP address and/or traffic type.

Students will configure static and dynamic NAT to route between private and public networks and cover the theory of Virtual Private Networks (VPN's)

Students will copy router configurations and IOS images to/from a TFTP Server. Privileged commands will be used to debug TCP/IP protocols to ensure proper operation of the routers. Students will also perform password recovery operations.

The course is primarily aimed at IP v4 but does give an overview of IP v6 addressing and covers migration from an IP v4 to an IP v6 network. Other protocols and technologies (VPN's / Wireless) may be demonstrated if time permits.

Course can be customised to precise requirements of customer.

Audience:

This course is suitable for anyone looking for a basic understanding of internetworking with Cisco devices and covers the CCNA syllabus.

Course is approximately 50% practical

 

     Course Outline

Objectives:

At the end of this course the student will be able to configure Cisco routers to:

  • Inter-connect networks using static routes
  • Inter-connect networks using RIP, OSPF and EIGRP.
  • Route between VLAN's.
  • Encapsulate datagrams using PPP
  • Apply Standard and Extended Access Control Lists
  • Encapsulate datagrams using HDLC
  • Encapsulate datagrams using Frame Relay
  • Configure Frame Relay Switching.
  • Support ISDN dial backup.
  • Route between public and private networks using NAT.

At the end of this course the student will be able to configure Cisco switches to:

  • Run Spanning Tree Protocol.
  • Support VLANs.
  • Connect switches via VLAN Trunks.

Practical Exercises:

  • Lab Exercise 1: Connectivity and Testing
  • Lab Exercise 2: Checking ARP Cache
  • Lab Exercise 3: Traceroute
  • Lab Exercise 4: Telnet into a Router
  • Lab Exercise 5: Configuring routers using TFTP
  • Lab Exercise 6: Configuration and Connectivity using RIP
  • Lab Exercise 7: Network Failure
  • Lab Exercise 8: Running other Routing Protocols
  • Lab Exercise 9: Spanning Tree Protocol
  • Lab Exercise 10: VLAN Exercise
  • Lab Exercise 11: Inter-VLAN Routing.
  • Lab Exercise 12: Classful & Classless Routing - Subnetting at Byte Boundaries
  • Lab Exercise 13: Access Lists
  • Lab Exercise 14: PPP Encapsulation
  • Lab Exercise 15: Frame Relay Encapsulation and ISDN dial backup.
  • Lab Exercise 16: Static and Dynamic NAT Configuration.
 

     Feedback (11)

Hands on and setup were nicely done and practical knowledge thoroughly imparted. Trainer was really helpful throughout.

B Kishore


Quiz

Maxis Broadband Sdn Bhd


the tools and the contents of the slide.

Kak Khen Man - Maxis Broadband Sdn Bhd


Very informative and detail explanation

Syahrifendi Lukmanilhakim - Maxis Broadband Sdn Bhd


Alot of example for on how protocol works

Maxis Broadband Sdn Bhd


Trainer can explain and give example for questions asked

SHAMSANI ABU BAKAR - Maxis Broadband Sdn Bhd


The instructor patient to explain and show the step on each lab session.

CHEE WAI KAN - Maxis Broadband Sdn Bhd


Mostly on the content for 1st day.

Maxis Broadband Sdn Bhd


Knowledge and the method of its transfer

Elavon Financial Services DAC (Sp. z o.o. o Wyznaczonym Przedmiocie Działalności) Oddział w Polsce


The trainer explains very well and he has a lot of patience and dedication to explain the subject.



The trainer explains very well and he has a lot of patience and dedication to explain the subject.



The course could be tailored to suit your needs and objectives. It can also be delivered on your premises if preferred.


  
  
  


  

Online Price per participant 6000 AED

  

Classroom Price per participant 6000 AED

Starts

 

Ends

 

  Workday courses take place between 9:30 and 16:30

Location


  Show venue details


Number of Participants






Related Courses

Total Courses 3


AI Awareness for Telecom

  14 hours

Blockchain for Telecom

  7 hours

BSS (BUSINESS SUPPORT SYSTEM) for Telecom

  21 hours

Deep Learning for Telecom (with Python)

  28 hours

OpenStack for Telecom

  14 hours

OSS ( Operation Support System ) for Telecom

  21 hours

Wireless Network and Telecom Network Security

  35 hours

 
Software-Defined Networking (SDN)

Software-Defined Networking (SDN)

What is Software-Defined Networking (SDN)?

Linux for Network Engineers

  14 hours

ONAP for Network Orchestration and Automation

  28 hours

ONAP for Automating Telecommunication Systems and Operations

  21 hours

OpenStack Architecture and Troubleshooting

  14 hours

OpenStack Bootcamp

  28 hours

OpenStack Bootcamp Extended

  35 hours

Software-Defined Networking

  28 hours

P4 Programming

  21 hours



Discounted Public Courses



This site in other countries/regions